Filamenti 
Filamentos 
Filaments 
Set of Calibration gauges (x2 units)
19.95 €
IVA esclusa
BCN3D printers include a new and improved Z calibration method, which uses Calibration Gauges instead of a piece of paper.
prodotto presente su 
Compatible with all BCN3D printers.
BCN3D printers include a new and improved Z calibration method, which uses Calibration Gauges instead of a piece of paper. This change increases the accuracy and repeatability of the process regarding the old method. Despite old Sigma and Sigmax users can still utilize the paper to calibrate, it is highly recommended to switch to Calibration Gauges. To take the best profit of the Calibration Gauges, we recommend to Sigma and Sigmax users to upgrade the firmware to version 2.0.0 or higher.
How to use it?
During Z Axis Calibration, place one Calibration Gauge between the nozzle and the printing surface glass and follow the instructions on the printer screen. Hold the gauge by the end and move it back and forth, without pressing the platform. Raise the platform until you feel some resistance while sliding the gauge. The gauge should not flex.
11106
Potrebbero anche piacerti
BCN3D printers include a new and improved Z calibration method, which uses Calibration Gauges instead of a piece of paper.
Nessuna recensione per il momento.