LUVOCOM 3F PET CF 9780 BK

Utilizziamo cookies per garantire il corretto funzionamento di questo sito web, analizzare il nostro traffico e, ove previsto, fornire ulteriori servizi agli utenti. Puoi scegliere se accettare l'uso dei cookie o disattivarli.

Maggiori informazioni Personalizza i cookie

LUVOCOM 3F PET CF 9780 BK | 750g

87.00 €

IVA esclusa

Aggiungi recensione

LUVOCOM® 3F PET CF is the easiest carbon fiber (CF) filled PET material to print on the market, with excellent isotropic mechanical properties

prodotto presente su

Diametro

1.75 mm
2.85 mm

Consegna: 10gg lavorativi

LUVOCOM 3F high-performance materials are optimized for industrial 3D printing. They enable quality controlled additive manufacturing of end-use parts. LEHVOSS materials are certified quality, and exhibit high mechanical strength.

LUVOCOM® 3F PET CF is optimized for industrial additive manufacturing and prints perfectly on all known filament printers.

Main benefits:

Easy to print
No warping
High mechanical strength
Excellent printed part surface

Main properties:

Tensile strength up to 80 MPa
Temperature resistant up to 125 °C
Low water uptake
It is compatible for dual extrusion with the following materials: PVA and HIPS

Riferimento 16134265

Scarica

GENERIC MACHINERY SETTINGS
The following settings are a generic guide, geometrical requirements of the application or the used printer could make necessary to adjust this values to obtain the best result. These generic settings are stablished for a 0.6mm Nozzle Diameter and a Glass Build Plate surface, note that for different nozzle diameters and/or a different build plate surface material, the settings should be changed accordingly.

Print speed: 40-60 mm/s
Layer Height: >0.2 mm
Brim/Skirt: 15 outlines with 1 layer
Extrusion temperatures: Range of nozzle temperatures (245-270ºC / 473-518ºF).
Build plate temperature: >50ºC / 122ºF
Build plate adhesion: We recommend to an adhesive promotor. Adding a (large) skirt/brim to the print will help in stablishing build plate adhesion during the print as well.
Cooling Fan: Off

MATERIAL HANDLING
Store: In order to prevent moisture pick up and contamination, supplied packaging should be kept closed and undamaged. For the same reason, partially used bags should be sealed before re-storage.
Allow the material that has been stored elsewhere to adapt to the temperature in the processing room while keeping the bag closed.
Packaging: LUVOCOM® 3F PET CF 9780 is supplied in plastic bag, moisture-proof packaging.

NOTE: When melted, LUVOCOM® 3F PET CF 9780 filament can be abrasive due to its carbon reinforcement. Printing with LUVOCOM® 3F PET CF 9780 may reduce brass nozzles and extruder driving wheels lifetime. For a better experience, using hardened steel nozzles and extruder driving wheels is advised.