Daylight Precision Model Grey Resin | 1Kg
66.00 €
IVA esclusa
Compatible with Liquid Crystal Precision and Precision 1.5
Easy to paint with a smooth finish prints, are readily attainable using our Precision Model resin. Developed for producing highly detailed prints, low visibility of layer lines and with an ultimate dry touch and smooth finish allows users to easily paint any piece.
prodotto presente su 
Daylight Precision Model Grey Resin
Easy to paint with a smooth finish prints, are readily attainable using our Precision Model resin. Developed for producing highly detailed prints, low visibility of layer lines and with an ultimate dry touch and smooth finish allows users to easily paint any piece.
Precision Model resin has been developed for prototyping of highly detailed objects, for example figurines and jewellery models.
The prime colour of the resin allows customers to easily paint them in any colour and make their parts as realistic as possible.
This resin has an ultimate dry touch and smooth finish, which delivers satisfactory customer experience.
You will experience the benefits of extremely fast exposure times allowing you to hold the finest details required for jewellery market.
The solid material is tough, durable and long lasting provided it is stored in dry conditions away from sunlight.
PREMLGY01
| Color | Grey |
| Viscosity (At 25ºC Brookfield spindle 3) |
121 cPs |
| Hardness (ASTM D2240 After post exposure) |
52 Shore D |
| Tensile strength (ASTM D638 After post exposure) |
11 MPa |
| Tensile modulus (ASTM D638 After post exposure) |
560 MPa |
| Elongation at break (ASTM D638 After post exposure) |
5% |
| Storage | 10 |
| Density | 1.09 g/cm3 |
Processing Instructions
Follow the procedures laid out in your 3D Liquid Crystal user manual. Polymer should be poured into the tray away from direct sunlight. Polymer can be reused but should be poured through a filter to remove solid lumps. Keep hood on at all times. Liquid polymer is soluble in water and soap. Object should be post cured under UV in water to remove any surface tack, followed by UV light at 80 °C for minimum of 1 hour to obtain the maximum tensile properties.
SODDISFATTO
5/5
Azienda seria affidabile e professionale.
Potrebbero anche piacerti
I clienti che hanno acquistato questo prodotto hanno comprato anche:
Compatible with Liquid Crystal Precision and Precision 1.5
Easy to paint with a smooth finish prints, are readily attainable using our Precision Model resin. Developed for producing highly detailed prints, low visibility of layer lines and with an ultimate dry touch and smooth finish allows users to easily paint any piece.