Kimya PC-S | 750g

Prezzo scontato

Kimya PC-S | 750g

35.25 € -25%

47.00 €

IVA esclusa

PC-S 3D Filament
The Kimya PC-S 3D filament is an amorphous thermoplastic. Polycarbonate (PC) is a transparent plastic. It offers high resistance to heat.

prodotto presente su

Colore

Trasparente

Diametro

1.75 mm
2.85 mm

Disponibile

The Kimya PC-S 3D filament is an amorphous thermoplastic. Polycarbonate (PC) is a transparent plastic. It offers high resistance to heat. It is solid and is suitable for demanding applications.

It is well suited to a variety of applications such as the production of parts in the automotive, engineering and aerospace sectors, as well as for producing hulls, helmets, toys, electronic items, etc.

The Kimya PC-S 3D filament has the following properties:

Can be sterilized
Resistant to heat (up to 140°C)
Food contact certification EU 10/2011, FDA 21 CFR
Complies with the REACH and RoHS standards

Riferimento PC1001TQ

Scarica

Kimya PC-S (TDS)

Scarica (585.2k)

Kimya PC-S (SDS)

Scarica (272.19k)

FILAMENT PROPERTIES

PROPERTIES	TEST METHODS	VALUES
Diameter	INS-6712	1.75 ± 0.1 mm
Density	ISO 1183-1	1.193 g/cm3
Moisture rate	INS-6711	< 1 %
Melt flow index (MFI)	ISO 1133-1 (@260°C – 5 kg)	25.5 g/10min

PRINT PARAMETERS AND SPECIMENS DIMENSIONS

PRINTING DIRECTION	XY
Printing Speed	40-70 mm/s
Infill	100% - rectilinear
Infill Angle	45°/-45°
Nozzle Temperature	280-320°C
Bed T°	100-120°C

PRINTED SPECIMENS PROPERTIES

	PROPERTIES	TEST METHODS	VALUES
THERMAL PROPERTIES	Maximum use T°	-	140 °C
MECHANICAL PROPERTIES	Tensile modulus	ISO 527-2/5A/50	2,172 MPa
	Tensile Strength	ISO 527-2/5A/50	53.8 MPa
	Tensile strain at strength	ISO 527-2/5A/50	3 %
	Tensile Stress at Break	ISO 527-2/5A/50	44.6 MPa
	Tensile strain at break	ISO 527-2/5A/50	4 %
	Flexural modulus	ISO 178	1,640 MPa
	Flexural stress at conventional deflection (3,5% strain)*	ISO 178	67.7 MPa
	Charpy impact resistance	ISO 179-1/1eA	7 kJ/m²
	Shore Hardness	ISO 868	79,2D

Note 1	*According to ISO 178, end of the test at 5% deformation even if there is no specimen break.
Note 2	The data should be considered as indicative values - Properties can be influenced by production conditions.

Created on 27/04/2108 - Revised on 29/07/2109.