Filamenti 
Filamentos 
Filaments 
- Prezzo scontato
Kimya PEBA-S | 500g
36.75 €
-25%
49.00 €
IVA esclusa
PEBA-S 3D Filament (PEBAX®)
The Kimya PEBA-S 3D filament is a thermoplastic elastomer. Polyether block amide (PEBA) is produced via polycondensation of a carboxylic acid polyamide with an alcohol-terminated polyether.
prodotto presente su 
The Kimya PEBA-S 3D filament is a thermoplastic elastomer. Polyether block amide (PEBA) is produced via polycondensation of a carboxylic acid polyamide with an alcohol-terminated polyether. PEBA, based on PEBAX by Arkema, is very flexible: it has the best elongation % in the range (>550%).
It can be used to make shoe soles or other sports equipment (cycling, golf, American football helmet) as it offers substantial energy return.
The Kimya PEBA-S 3D filament has the following properties:
- Flexibility (>550% tensile elongation at break)
- Impact resistance
- Complies with the RoHS and REACH standards
PA2001TQ
FILAMENT PROPERTIES
| PROPERTIES | TEST METHODS | VALUES |
|---|---|---|
| Diameter | INS-6712 | 1.75 ± 0.1 mm 2.85 ± 0.1 mm |
| Density | ISO 1183-1 | 1.013 g/cm3 |
| Moisture rate | INS-6711 | < 1 % |
| Melt flow index (MFI) | ISO 1133-1 (@220°C – 10 kg) | 13.6 g/10min |
| Melting Temperature (Tm) | ISO 11357-1 DSC (10°C/min – -90-190°C) | 149 °C |
PRINT PARAMETERS AND SPECIMENS DIMENSIONS
| PRINTING DIRECTION | XY |
|---|---|
| Printing Speed | 20-60 mm/s |
| Infill | 100% - rectilinear |
| Infill Angle | 45°/-45° |
| Nozzle Temperature | 210-260°C |
| Bed T° | 70-90°C |
PRINTED SPECIMENS PROPERTIES
| PROPERTIES | TEST METHODS | VALUES | |
|---|---|---|---|
| MECHANICAL PROPERTIES | Tensile modulus | ISO 37/2/500 | 63 MPa |
| Tensile Strength | ISO 37/2/500 | 32.8 MPa | |
| Tensile strain at strength | ISO 37/2/500 | > 550 % | |
| Tensile Stress at Break | ISO 37/2/500 | 32.3 MPa | |
| Tensile strain at break | ISO 37/2/500 | > 550 % | |
| Flexural modulus | ISO 178 | 70 MPa | |
| Flexural stress at conventional deflection (3,5% strain)* | ISO 178 | 2.4 MPa | |
| Charpy impact resistance | ISO 179-1/1eA | No Break | |
| Shore Hardness | ISO 868 | 93A |
| Note 1 | *According to ISO 178, end of the test at 5% deformation even if there is no specimen break. |
| Note 2 | The data should be considered as indicative values - Properties can be influenced by production conditions. |
Created on 13/11/2019 - Revised on 13/11/2019.
Potrebbero anche piacerti
- Prezzo scontato
I clienti che hanno acquistato questo prodotto hanno comprato anche:
PEBA-S 3D Filament (PEBAX®)
The Kimya PEBA-S 3D filament is a thermoplastic elastomer. Polyether block amide (PEBA) is produced via polycondensation of a carboxylic acid polyamide with an alcohol-terminated polyether.
Nessuna recensione per il momento.