Ultracur3D® Color Kit | 500g

70.00 €
IVA esclusa
paga in 3 rate con Klarna
pay in 3 with Klarna
paga en 3 plazos con Klarna
payez en 3 fois avec Klarna
prodotto presente su  Crea3D è presente su MEPA
Colore
Disponibile

 

Intended Use

Ultracur3D® CK Line can be used to print parts in a wide range of colors, without the need for post-processing. To use the color kits, you just mix a small amount of the color kit into your clear base resin before printing.

 

Available color

  • Ultracur3D® CK 01 (White)
  • Ultracur3D® CK 02 (Yellow)
  • Ultracur3D® CK 03 (Cyan)
  • Ultracur3D® CK 04 (Magenta)
  • Ultracur3D® CK 06 (Black)

 

Mixing method

1) Shake the color kits well before use. Pigment dispersions will often show some settling over time.

2) Determine the amount of color kit you want to add.

3) Mix the clear resin with the color kit:

  • Option 1: using an external mixer, just mix until the mixture looks homogenous (15-30 minutes). Since materials will be exposed to light, it is recommended to do this in a UV-free (orange light) room.
  • Option 2: Add the required amount of Color kit to your base resin in its original container (bottle) and shake until homogenous.

4) Determine appropriate printing parameters and start printing!

 

Compatibility with other Ultracur3D® 3D-printing resin

The Ultracur3D® CK Line has shown good compatibility with both rigid Ultracur3D® materials (ST-line, RG-line) as well as flexible Ultracur3D® materials (FL / EL – Line).

300118

Scrivi la tua recensione

Nessuna recensione per il momento.

Potrebbero anche piacerti