Filamenti 
Filamentos 
Filaments 
UltiMaker RapidRinse™ | 1.75mm | 450g | Method Series
169.00 €
Tax excluded
Not Rated
UltiMaker RapidRinse™
Print your parts with confidence in ABS-R and RapidRinse™, drop your part into tap water, and watch the supports dissolve to nothing in just minutes.
prodotto presente su 
ABS, FINALLY AS EASY AS PLA
ABS is one of the most in-demand yet difficult materials to 3D print. METHOD X patented VECT™ 110 technology combined with proprietary RapidRinse™ support delivers incomparable ABS parts with unprecedented ease.
TAP WATER SOLUBLE
Forget the cumbersome wash tanks and chemicals - RapidRinse™ dissolves in pure tap water so it’s easy to use in just about any environment.
DISSOLVES IN MINUTES
You don’t have time to wait around while your print dissolves, so we’ve engineered RapidRinse™ to dissolve faster than PVA and competitive high-temp dissolvable support materials. There’s really nothing that comes close.
This material is a moisture sensitive material. The spools are shipped in resealable mylar bags, which are impermeable to light and moisture and help protect the filament from potential damage. Within the spool there is also desiccant to keep the environment moisture-free. A moisture sensitive material will run the risk of a high moisture uptake if stored improperly, which can result in decreased print quality and damage to the extruder.
375-0063A
You might also like
UltiMaker RapidRinse™
Print your parts with confidence in ABS-R and RapidRinse™, drop your part into tap water, and watch the supports dissolve to nothing in just minutes.
No customer reviews for the moment.