Steel Nozzle with WS2 Coating

49.99 €
Tax excluded
Not Rated
paga in 3 rate con Klarna
pay in 3 with Klarna
paga en 3 plazos con Klarna
payez en 3 fois avec Klarna
prodotto presente su  Crea3D è presente su MEPA
Diameter
In Stock

Various sizes at 0.4/0.6/0.8mm, suitable for 1.75mm filaments.

Product Characters:

  • Abrasion resistance
  • High-Temperature resistance
  • Low friction coefficient as 0.03 with WS2 Coating; restrain to filament accumulation; being stable in chemical properties; being non-toxic, non-corrosive and insoluble
  • Good lubrication and anti-abrasive performance under the highest temperature at 450℃
  • Ultra low thrust for filament fluidity

Material Characteristic:

  • Mohs Hardness: 7.8
  • Max. Print Temp: 450°C
  • Coefficient of Heat Conductivity: 26W/m.k
  • CTE: 12μm/m. °C

In addition to being suitable for normal filaments, the nozzle is also especially suitable for those composite filaments with abrasive additives such as carbon fiber, steel, wood, boron carbide, tungsten, phosphorescent pigment, etc., and those high-temperature-resistant filaments.

3011999060A01

Write your review

No customer reviews for the moment.

You might also like