- Reduced price
![](https://www.crea3d.com/6046-large_default/raise3d-pro3-plus.jpg)
Raise3D Pro3 Plus
Professional Dual Extruder 3D Printer
Choose RaiseShield, the extended warranty for Raise3D products.
Forged from the Pro2 Series, Raise3D’s newly launched Pro3 Series professional dual extruder 3D printers meet the needs of both production and multi-sized rapid prototyping, with high precision and round-the-clock stable operation. The Pro3 Series is comprised of the Pro3, with a build volume of 300x300x300mm, and the Pro3 Plus, with a build volume of 300x300x605mm, fulfilling the requirements of large-scale production and multi-sized rapid prototyping.
A high-quality printer design that includes enhanced features and a smart assistant system known as EVE, all of which make the Pro3 Series dual extruder 3D printers an excellent option for professional 3D printing.
The Pro3 Series dual extruder 3D printers connect with Raise3D’s 3D printing software ecosystem, that includes a 3D slicing program, ideaMaker, an open-software template called ideaMaker Library, and our cloud-based 3D printing software RaiseCloud.
The Pro3 Series features upgraded printing platform features for high-quality printing performance and a better overall experience.
These structural changes enable the Pro3 Series to provide better print results and an easier printing experience.
The Pro3 Series is equipped with an independent modular extruder with a dual extrusion system. This allows the Pro3 Series to print using a variety of filaments, reduce clogging, and allow the convenient disassembly and replacement of components. The hot end of the Pro3 Series is easy to remove, which can be done without using tools, making it simple to replace and maintain. Users can also easily take off the front cover of the extruder to accurately locate common printing occurrences such as filament jams.
The Air Flow Manager of the Pro3 Series is located on the back of the printer, improving heat dissipation and air circulation, creating a stable environment inside the print chamber. Equipped with a HEPA air filter, Air Flow Manager can also filter and clean the air inside the chamber.
The Pro3 Series has a built-in EVE assistant system, preloaded with common printing problems and corresponding solutions. The EVE assistant can guide users to accurately locate and resolve issues that could affect the final print job. The EVE assistant has a function that gives users reminders about regular scheduled interventions to ensure that printer maintenance is performed on time. It also helps reduce maintenance time and communication costs for an efficient maintenance process.
A dual extruder 3D printer can perform more advanced functions such as producing dual color models and dual material models. A professional dual extruder 3D printer will have additional design features resulting in a higher quality print job.
The Pro3 Series professional dual extruder 3D printers have a single-side nozzle lifting technology with fast nozzle switching. Therefore, the nozzles can lift independently and switch within a second, and without being affected by 3D printing material or temperature.
< 0.005 mm, 5 micron
< 1 second switching time
Compatible with flexible filaments
Either a power outage or a filament outage (when the filament runs out) can cause a print job to be lost if they occur in the middle of the 3D printing process. However, the Pro3 Series has a filament run-out sensor on its extruders to alert when the filament is about to run out and saves the print job. It also has a second-generation power loss function to save the printing status in the event of a power outage and can continue printing from the same point when power is restored.
Another safety feature of the Pro3 Series is that it can automatically detect when a door is opened and will immediately pause the print.
Pro3 | Pro3 Plus | |
GENERAL | ||
Build Volume (W×D×H) | Single Extruder Print: 300×300×300 mm Dual Extruder Print: 255×300×300 mm |
Single Extruder Print: 300×300×605 mm Dual Extruder Print: 255×300×605 mm |
Machine Size (W×D×H) | 620×626×760 mm | 620×626×1105 mm |
Print Technology | FFF | |
Print Head System | Dual-head with electronic lifting system | |
Filament Diameter | 1.75 mm | |
XYZ Step Size | 0.78125, 0.78125, 0.078125 micron | |
Print Head Travel Speed | 30–150 mm/s | |
Build Plate | Flexible Steel Plate with Buildtak | |
Max Build Plate Temperature | 120 ºC | |
Heated Bed Material | Silicone | |
Build Plate Leveling | Mesh-leveling with Flatness Detection | |
Filament Run-out Sensor | Available | |
Supported Materials | PLA / ABS / HIPS / PC / TPU / TPE / PETG / ASA / PP / PVA / Nylon / Glass Fiber Infused / Carbon Fiber Infused / Metal Fill / Wood Fill | |
Layer Height | 0.01 – 0.25 mm | |
Nozzle Diameter | 0.4 mm (Default), 0.2/ 0.6/ 0.8/ 1.0 mm (Available) | |
Max Nozzle Temperature | 300 ºC | |
Connectivity | Wi-Fi, LAN, USB port, Live camera | |
Noise Emission (Acoustic) | <55 dB(A) when building | |
Operating Ambient Temperature | 15-30 ºC, 10-90 % RH non-condensing | |
Storage Temperature | -25 ℃ to +55 ℃, 10-90 % RH non-condensing | |
Filter | HEPA filter with activated charcoal | |
EVE Smart Assistant | Available | |
Net Weight | 52.5 kg | 61.15 kg |
Gross Weight (Carton Only) | 76.6 kg | 87.45 kg |
Gross Weight (Carton with Pallet) | 84.55 kg | 95.4 kg |
ELECTRICAL | ||
Power Supply Input | 100-240 V AC, 50/60 Hz 230 V @3.3 A | |
Power Supply Output | 24 V DC, 600 W | |
SOFTWARE | ||
Slicing Software | ideaMaker | |
Supported File Types | STL/ OBJ/ 3MF/ OLTP | |
Supported OS | WINDOWS/ macOS/ Linux | |
Machine Code Type | GCODE | |
PRINTER CONTROLLER | ||
User Interface | 7-inch Touch Screen | |
Network | Wi-Fi, Ethernet | |
Power Loss Recovery | Available | |
Screen Resolution | 1024×600 | |
Motion Controller | Atmel ARM Cortex-M4 120MHz FPU | |
Logic Controller | NXP ARM Cortex-A9 Quad 1 GHz | |
Memory | 1 GB | |
Onboard Flash | 8 GB | |
OS | Embedded Linux | |
Ports | USB 2.0×2, Ethernet×1 |
No customer reviews for the moment.