Polymaker PolyMax™ PC | 750g
37.15 €
Tax excluded
Not Rated
PolyMax™ PC is an engineering PC filament combining excellent strength,toughness, heat resistance and printing quality. It outperforms many other choices of PC while still printing at a relatively low printing temperature. With a softening point of 113°C it can operate in demanding environments where impact resistance, heat resistance and vibrations occur.
prodotto presente su 
What is the best surface adhesive for PolyMax™ PC?
In our experience we had excellent experience with Magigoo PC. This special glue allows great adhesion when the build plate is hot and easy release when the build plate cools down.
Does PolyMax™ PC need to be annealed?
Annealing is the process of heating up the printed parts at a certain temperature for a certain period of time. You can anneal PolyMax™ PC at 90_ for 2h.
The purpose of annealing PolyMax™ PC is to release the internal stress which accumulates during the printing process. This internal stress can creates micro cracks over time and weaken the part.
(NOTE: In the case of semi-crystalline polymers such as Nylon, annealing purpose is mainly to crystalize the material for better mechanical and thermal properties).
Is this impact resistant, like for rc car parts?
Yes, PolyMax™ PC is a toughness enhanced PC product, the charpy impact strength is 22KJ/_.
PC02002
You might also like
Customers who bought this product also bought:
- Reduced price
PolyMax™ PC is an engineering PC filament combining excellent strength,toughness, heat resistance and printing quality. It outperforms many other choices of PC while still printing at a relatively low printing temperature. With a softening point of 113°C it can operate in demanding environments where impact resistance, heat resistance and vibrations occur.
No customer reviews for the moment.