Daylight Precision Concept Green Resin | 1Kg
Daylight Precision Concept Green Resin
Bring your jewellery and model figurines to life with Concept. Print perfect jewellery prototypes or detailed figurines with high strength, durability, and most importantly high accuracy with finished smooth surfaces.
Jewellery prints can be shown as is or easily painted by airbrush. For painting models, we recommend printing in Precision Model resin for the best paint results, using Concept resin for purely illustrating high detail.
Color | Green |
Viscosity (At 25ºC Brookfield spindle 3) |
690 cPs |
Hardness (After post exposure) |
92 Shore D |
Tensile strength ASTM D638 (After Post Exposure, 1hr UV) |
45 MPa |
Elongation at break ASTM D638 (After Post Exposure, 1hr UV) |
2% |
Storage | 10 |
Density | 1.1 g/cm3 |
Processing Instructions
Follow procedure laid out in your 3D Liquid Crystal’s user manual.
Polymer should be poured into the tray away from direct sunlight. Polymer can be reused but should be poured through a filter to remove solid lumps. Keep hood on at all times.
Liquid polymer is soluble in water and soap. In order to clean the printed objects, we recommend Photocentric’s Resin Cleaner, followed by water.
The cleaned objects should be post exposed at 80°C under UV for a minimum of 1 hour to obtain the maximum tensile properties. Alternatively, the parts can be post exposed on water under UV for 30 minutes.
No customer reviews for the moment.