Daylight Precision Mould Blue Resin | 1Kg
78.00 €
Tax excluded
Not Rated
Compatible with Liquid Crystal Precision and Precision 1.5
Ideal for the creation of high resolution silicone rubber moulds, we have Mould resin. Parts can withstand the temperatures (up to 180°C) and pressure required for vulcanisation. Along with this the parts show great strength, smooth surfaces, and highly accurate prints.
prodotto presente su 
Daylight Precision Mould Blue Resin
Ideal for the creation of high resolution silicone rubber moulds, we have Mould resin.
Parts can withstand the temperatures (up to 180°C) and pressure required for vulcanisation. Along with this the parts show great strength, smooth surfaces, and highly accurate prints.
Precision Mould has been designed for creating high definition jewellery parts especially for the Precision Printer.
The printed parts will display a high tensile strength, high accuracy and detail for the use in the modern jewellery market.
The parts printed with this resin withstand high temperatures (up to 180°C) and pressures required for vulcanizing.
Parts printed with the Precision Mould resin are ideal for the use as pattern in high resolution silicon rubber moulds.
The printed parts will display a smooth surface and a good surface finish.
Key benefits include high tensile strength, high accuracy, no shape deformation at elevated temperatures, smooth surface, easy to use and finish.
PREMDBU01
| Color | Blue |
| Viscosity (At 25ºC Brookfield spindle 3) |
700 cPs |
| Hardness (After post exposure) |
90 Shore D |
| Tensile strength ASTM D638 (After Post Exposure, 1hr UV) |
49 MPa |
| Elongation at break ASTM D638 (After Post Exposure, 1hr UV) |
2% |
| Storage | 10 |
| Density | 1.1 g/cm3 |
Processing Instructions
Follow procedure laid out in your 3D Liquid Crystal’s user manual.
Polymer should be poured into the tray away from direct sunlight. Polymer can be reused but should be poured through a filter to remove solid lumps. Keep hood on at all times.
Liquid polymer is soluble in water and soap.
In order to clean the printed objects, we recommend Photocentric’s Resin Cleaner followed by water.
The cleaned objects should be post exposed at 80°C under UV for a minimum of 1 hour to obtain the maximum tensile properties.
You might also like
Compatible with Liquid Crystal Precision and Precision 1.5
Ideal for the creation of high resolution silicone rubber moulds, we have Mould resin. Parts can withstand the temperatures (up to 180°C) and pressure required for vulcanisation. Along with this the parts show great strength, smooth surfaces, and highly accurate prints.
No customer reviews for the moment.