Kimya PEI-1010 (ULTEM®)

135.00 €
Tax excluded
Not Rated
paga in 3 rate con Klarna
pay in 3 with Klarna
paga en 3 plazos con Klarna
payez en 3 fois avec Klarna
prodotto presente su  Crea3D è presente su MEPA
Weight
Diameter
In Stock

The Kimya PEI-1010 3D filament belongs to the family of thermoplastic polyimides. Polyetherimide (PEI) is an amorphous thermoplastic. It benefits from good resistance to temperature and solvents, as well as high dimensional stability. It is used in the electronics, transport and medical sectors. The Kimya PEI-1010 3D filament is based on ULTEM by Sabic® and it has the following properties:

  • High rigidity
  • UV resistance
  • Flame retardant – UL94 V0 eligible
  • Food contact certification EU 10/2011FDA 21 CFR
  • Complies with the REACH regulation and the RoHS directive

Store away from light, humidity and heat to maintain the properties of the product.

PI1001TQ

FILAMENT PROPERTIES

 

PROPERTIESTEST METHODSVALUES
Diameter INS-6712 1.75 ± 0.1 mm
2.85 ± 0.1 mm
Density ISO 1183-1 1.28 g/cm3
Melt flow index (MFI) ISO 1133-1 (@340°C – 5 kg) 14 - 16 g/10min
Glass transition temperature (Tg) ISO 11357-1 DSC (10°C/min - 0-420°C) 217 °C

 

PRINT PARAMETERS AND SPECIMENS DIMENSIONS

 

PRINTING DIRECTIONXY
Printing Speed 40 mm/s
Infill 100% -
Infill Angle 45°/-45°
Nozzle Temperature 380°C
Chamber T° 220°C

 

PRINTED SPECIMENS PROPERTIES

 

PROPERTIESTEST METHODSVALUES
MECHANICAL PROPERTIES Tensile modulus ISO 527 2,917.5 MPa
Tensile Strength ISO 527-2/1A/50 90.9 MPa
Tensile strain at strength ISO 527-2/1A/50 5,6 %
Tensile Stress at Break ISO 527-2/1A/50 90.9 MPa
Tensile strain at break (type A) ISO 527-2/1A/50 5,6 %
Tensile strain at break (type B et C) ISO 527-2/1A/50 5.6 %
Flexural modulus ISO 178 2,236 MPa
Deformation at Flexural Strain ISO 178 >5 %
Flexural stress at conventional deflection (3,5% strain)* ISO 178 76 MPa
Charpy impact resistance ISO 179-1/1eA 3.1 kJ/m²
Shore Hardness ISO 868 84,5D

 

Note 1 The data should be considered as indicative values - Properties can be influenced by production conditions.

Created on 10/03/2022 - Revised on 13/03/2023.

Write your review

No customer reviews for the moment.

You might also like