![](https://www.crea3d.com/5853-large_default/kimya-pei-1010-ultem.jpg)
![](https://www.crea3d.com/5853-large_default/kimya-pei-1010-ultem.jpg)
Kimya PEI-1010
The Kimya PEI-1010 3D filament belongs to the family of thermoplastic polyimides. Polyetherimide (PEI) is an amorphous thermoplastic. It benefits from good resistance to temperature and solvents, as well as high dimensional stability.
The Kimya PEI-1010 3D filament belongs to the family of thermoplastic polyimides. Polyetherimide (PEI) is an amorphous thermoplastic. It benefits from good resistance to temperature and solvents, as well as high dimensional stability. It is used in the electronics, transport and medical sectors. The Kimya PEI-1010 3D filament is based on ULTEM by Sabic® and it has the following properties:
Store away from light, humidity and heat to maintain the properties of the product.
PROPERTIES | TEST METHODS | VALUES |
---|---|---|
Diameter | INS-6712 | 1.75 ± 0.1 mm 2.85 ± 0.1 mm |
Density | ISO 1183-1 | 1.28 g/cm3 |
Melt flow index (MFI) | ISO 1133-1 (@340°C – 5 kg) | 14 - 16 g/10min |
Glass transition temperature (Tg) | ISO 11357-1 DSC (10°C/min - 0-420°C) | 217 °C |
PRINTING DIRECTION | XY |
---|---|
Printing Speed | 40 mm/s |
Infill | 100% - |
Infill Angle | 45°/-45° |
Nozzle Temperature | 380°C |
Chamber T° | 220°C |
PROPERTIES | TEST METHODS | VALUES | |
---|---|---|---|
MECHANICAL PROPERTIES | Tensile modulus | ISO 527 | 2,917.5 MPa |
Tensile Strength | ISO 527-2/1A/50 | 90.9 MPa | |
Tensile strain at strength | ISO 527-2/1A/50 | 5,6 % | |
Tensile Stress at Break | ISO 527-2/1A/50 | 90.9 MPa | |
Tensile strain at break (type A) | ISO 527-2/1A/50 | 5,6 % | |
Tensile strain at break (type B et C) | ISO 527-2/1A/50 | 5.6 % | |
Flexural modulus | ISO 178 | 2,236 MPa | |
Deformation at Flexural Strain | ISO 178 | >5 % | |
Flexural stress at conventional deflection (3,5% strain)* | ISO 178 | 76 MPa | |
Charpy impact resistance | ISO 179-1/1eA | 3.1 kJ/m² | |
Shore Hardness | ISO 868 | 84,5D |
Note 1 | The data should be considered as indicative values - Properties can be influenced by production conditions. |
Created on 10/03/2022 - Revised on 13/03/2023.
No customer reviews for the moment.