Kimya ABS Carbon
48.00 €
Tax excluded
Not Rated
Kimya ABS Carbon Filament
The Kimya ABS Carbon 3D filament belongs to the styrenic polymer family. Acrylonitrile-butadiene-styrene-carbon (ABS Carbon) is a mixture of ABS and carbon fibers.
prodotto presente su 
The Kimya ABS Carbon 3D filament belongs to the styrenic polymer family. Acrylonitrile-butadiene-styrene-carbon (ABS Carbon) is a mixture of ABS and carbon fibers. The carbon fibers give the filament improved rigidity compared to a standard ABS. This filament is highly valued by manufacturers of drones and by modeling aficionados. It is also used to make tools. The Kimya ABS Carbon 3D filament has the following properties:
- No shrinkage
- Better tensile modulus than ABS-S
- Less warpage than ABS-S
- Complies with the REACH regulation and the RoHS directive
Store away from light, humidity and heat to maintain the properties of the product.
PS1002TQ
FILAMENT PROPERTIES
| PROPERTIES | TEST METHODS | VALUES |
|---|---|---|
| Diameter | INS-6712 | 1.75 ± 0.1 mm 2.85 ± 0.1 mm |
| Density | ISO 1183-1 | 1.048 g/cm3 |
| Moisture rate | INS-6711 | < 0.5 % |
| Melt flow index (MFI) | ISO 1133-1 (@220°C – 10 kg) | 17.4 g/10min |
| Glass transition temperature (Tg) | ISO 11357-1 DSC (10°C/min - 20-280°C) | 108 °C |
PRINT PARAMETERS AND SPECIMENS DIMENSIONS
| PRINTING DIRECTION | XY |
|---|---|
| Printing Speed | 10 mm/s |
| Infill | 100% - rectilinear |
| Infill Angle | 0°/0° |
| Nozzle Temperature | 245°C |
| Bed T° | 90°C |
PRINTED SPECIMENS PROPERTIES
| PROPERTIES | TEST METHODS | VALUES | |
|---|---|---|---|
| MECHANICAL PROPERTIES | Tensile modulus | ISO 527-2/5A/50 | 3,396 MPa |
| Tensile Strength | ISO 527-2/5A/50 | 36.7 MPa | |
| Tensile Stress at Break | ISO 527-2/5A/50 | 31 MPa | |
| Tensile strain at break (type A) | ISO 527 | 1.9 % | |
| Flexural modulus | ISO 178 | 2,952 MPa | |
| Deformation at Flexural Strain | ISO 178 | >5 % | |
| Flexural stress at conventional deflection (3,5% strain)* | ISO 178 | 173 MPa | |
| Charpy impact resistance | ISO 179-1/1eA | 18 kJ/m² | |
| Shore Hardness | ISO 868 | 78.2D |
| Note 1 | *According to ISO 178, end of the test at 5% deformation even if there is no specimen break. |
| Note 2 | The data should be considered as indicative values - Properties can be influenced by production conditions. |
Created on 10/01/2018 - Revised on 13/03/2023.
You might also like
Kimya ABS Carbon Filament
The Kimya ABS Carbon 3D filament belongs to the styrenic polymer family. Acrylonitrile-butadiene-styrene-carbon (ABS Carbon) is a mixture of ABS and carbon fibers.
No customer reviews for the moment.