Kimya PC-FR | 1.75mm

Reduced price

Kimya PC-FR | 1.75mm | 750g

70.50 € -25%

94.00 €

Tax excluded

Not Rated

PC-FR 3D Filament
The Kimya PC-FR is an amorphous thermoplastic that combines the advantages of a polycarbonate with flame retardant properties linked to the formulation.

Color: Light Grey

prodotto presente su

The Kimya PC-FR is an amorphous thermoplastic that combines the advantages of a polycarbonate with flame retardant properties linked to the formulation. This low moisture sensitive filament has good dimensional stability, a wide operating temperature range (-80 to 105°C) with its high Tg and good impact resistance.

All these properties make it suitable for a variety of demanding applications such as the production of parts in the railway and automotive sectors as well as in the electrical and electronic fields.

The Kimya PC-S 3D filament has the following properties:

Good dimensional stability
Wide usage temperature range (-80°C à +105°C)
Flame retardant – EN45545 class R22/R23/R24/R26 HL3, class R1/R6 HL1, HL2, HL3
Complies with the REACH regulation and the RoHS directive

Reference PC1004TQ

FILAMENT PROPERTIES

PROPERTIES	TEST METHODS	VALUES
Diameter	INS-6712	1.75 ± 0.1 mm 2.85 ± 0 mm
Density	ISO 1183-1	1.294 g/cm3
Moisture rate	INS-6711	< 0.5 %
Melt flow index (MFI)	ISO 1133-1 (@260°C – 2.16 kg)	5.1 g/10min
Glass transition temperature (Tg)	ISO 11357-1 DSC (10°C/min - 20-300°C)	117 °C

PRINT PARAMETERS AND SPECIMENS DIMENSIONS

PRINTING DIRECTION	XY
Printing Speed	25 mm/s
Infill	100% - rectilinear
Infill Angle	45°/-45°
Nozzle Temperature	325°C
Bed T°	110°C
Chamber T°	80°C

PRINTED SPECIMENS PROPERTIES

	PROPERTIES	TEST METHODS	VALUES
THERMAL PROPERTIES	Maximum use T°	-	105 °C
MECHANICAL PROPERTIES	Tensile modulus	ISO 527-2/5A/50	2,680 MPa
	Tensile Strength	ISO 527-2/5A/50	66.2 MPa
	Tensile strain at strength	ISO 527-2/5A/50	3,1 %
	Tensile Stress at Break	ISO 527-2/5A/50	66.4 MPa
	Tensile strain at break (type A)	ISO 527-2/5A/50	3,1 %
	Flexural modulus	ISO 178	2,230 MPa
	Deformation at Flexural Strain	ISO 178	>5 %
	Flexural stress at conventional deflection (3,5% strain)*	ISO 178	83.2 MPa
	Shore Hardness	ISO 868	80,7D

Note 1	*According to ISO 178, end of the test at 5% deformation even if there is no specimen break.
Note 2	The data should be considered as indicative values - Properties can be influenced by production conditions.