Promo filamenti 
Promoción filamento 
Promo filament 
iglidur® I180-PF | 750g | igus®
75.00 €
Tax excluded
Not Rated
The igus® 3D printing materials are especially advantageous in moving applications due to their abrasion resistance and durability with a tested service life.
prodotto presente su 
3D printer filament: iglidur® |180-PF
Components made of igus® Tribo-Filament are up to 50 times more wear-resistant than standard materials for 3D printing and therefore have an extremely long service life. Due to their excellent tribological properties, they are suited for 3D printing of replacement parts, for example bearings, drive nuts, gears and other wear parts. The igus® Tribo-Filaments can be processed on 3D printers that are based on the fused-deposition-modelling method (FDM/FFF) and that allow the nozzle temperature to be set as required.
- Versatile use: good combination of high wear resistance, strength and temperature resistance
- Good processing ability with an enclosed printer and igus® adhesive film
- Flexural strength: 46 / 33 MPa
Typical application areas
- Special machine construction
- Jig construction
- Complex wear parts
I180-PF-0300-0750
General properties
|
Colour |
white |
|
Material suitable for |
Beginner |
|
Max. moisture absorption (at 23 °C/73 °F, 50% r.h.) |
0.3 Wt.-%, test method DIN 53495 |
|
Max. water absorption |
0.9 Wt.-% |
|
Net weight |
250 g |
|
Coefficient of sliding friction, dynamic, against Cf53 steel |
0.24 |
|
Coefficient of sliding friction, dynamic, against 304 stainless steel |
0.17 |
|
pv value, max. (dry) |
0.23 MPa ⋅ m/s |
|
Flexural strength |
46 / 33 MPa |
Physical and thermal properties
|
Max. long-term application temperature |
80 °C |
|
Max. short-term application temperature |
90 °C |
|
Lower application temperature |
-40 °C |
|
Thermal expansion coefficient (at 23°C/73°F) |
9 K-1 ⋅ 10-5, test method DIN 53752 |
|
Heat conductivity |
0.23 W/(m ⋅ K), test method ASTM C 177 |
|
Pressure load |
59 MPa |
|
Max. recommended surface pressure (at +20 °C/68 °F) |
30 MPa |
Requirements
|
Mould-free according to DIN EN ISA 846 Procedure A |
No |
Processing instructions
|
Nozzle temperature (min.) |
250 °C |
|
Nozzle temperature (max.) |
260 °C |
|
Bed temperature (min.) |
90 °C |
|
Bed temperature (max.) |
110 °C |
|
Recommended adhesion |
igus® adhesive film |
|
Construction space |
Closed installation space necessary |
|
Component cooling |
A component cooling is not necessary, with cooling switched on it is also possible to print |
Customers who bought this product also bought:
The igus® 3D printing materials are especially advantageous in moving applications due to their abrasion resistance and durability with a tested service life.
No customer reviews for the moment.