iglidur® I190-PF | 750g

iglidur® I190-PF | 750g | igus®

79.00 €

Tax excluded

Not Rated

The igus® 3D printing materials are especially advantageous in moving applications due to their abrasion resistance and durability with a tested service life.

prodotto presente su

Diameter

1.75 mm
2.85 mm

There are not enough products in stock

iglidur® I190-PF Flexurally high strength and wear-resistant filament

iglidur I190-PF is characterised by high wear resistance as the material is enriched with solid lubricants. It can be processed on regular 3D printers, but a closed 3D printer is recommended. Due to its high wear resistance and excellent mechanical specifications (strength, toughness, layer adhesion), it is an all-round material that is suitable for most applications and 3D printers.

When to use it?

For all types of applications where low friction and high wear resistance are important
If an easy to process tribofilament is required.
When higher strengths are required.

When not to use it?

If the application temperature is higher than 90°C in the long term
For applications under water or with high humidity (→ iglidur I180-PF)
If the application requires a food grade material (→ iglidur I150-PF)
When an even easier to process tribofilament is required (→ iglidur I150-PF)

Reference I190-PF-0300-0750

General properties

Color	yellow
Material suitable for	Beginner
Max. moisture absorption (at 23 °C/73 °F, 50% r.h.)	0.3 Wt.-%, test method DIN 53495
Net weight	750 g
Flexural strength	70 MPa

Physical and thermal properties

Max. long-term application temperature	90 °C
Max. short-term application temperature	110 °C
Lower application temperature	-40 °C
Max. recommended surface pressure (at +20 °C/68 °F)	35 MPa