• Reduced price

XSTRAND™ GF30-PP (Polypropylene + Glass Fiber)

48.00 € -20%
60.00 €
Tax excluded
Not Rated
paga in 3 rate con Klarna
pay in 3 with Klarna
paga en 3 plazos con Klarna
payez en 3 fois avec Klarna
prodotto presente su  Crea3D è presente su MEPA
Weight
Diameter
In Stock

Developed by Owens Corning, a world leader in composite solutions, XSTRAND™ GF30-PP filament for 3D printing is a reinforced material designed to be compatible with any standard Fused Filament Fabrication 3D printer (1.75 and 2.85 mm diameters available).


BENEFITS

  • High stiffness and strength (up to +200% compare to ABS)
  • Large operational temperature range (-20°C to 120°C)
  • Very good chemical and UV resistance
  • Very low moisture absorption
  • Excellent layer adhesion
  • Reduced warping effect compared to neat PP


POTENTIAL APPLICATIONS

XSTRAND™ GF30-PP is designed for functional prototyping and demanding applications such as industrial tooling, transportation, electronics, small appliances, sports & leisure…



About XSTRAND™ 3D Fliament

XSTRAND™ GF30-PP and GF30-PA6 ensure high performance and wear resistance in the most extreme conditions. Developed with superior durability, XSTRAND™ products give you the ability to design and print parts on site in a fraction of the time at a fraction of the cost. Advantages include chemical and UV resistance, thermal stability, superior durability, easy to use, high performance, design flexibility and the ability to test solutions in real world conditions.

PP-4452A050

Printing Recommendations

XSTRAND - PP

PrinterLayer HeightBed config.Nozzle Temp (°C)Bed Temp (°C)Speed (mm/s)Retraction (mm)Brim/RaftHeated Chamber
Ultimaker 0.2 Magigoo PPGF 270 100 50 mm/s 1 yes N/A
Raise3D 0.2 Magigoo PPGF 240 100 50 mm/s 1 yes N/A


XSTRAND - PA6

PrinterLayer HeightBed config.Nozzle Temp (°C)Bed Temp (°C)Speed (mm/s)Retraction (mm)Brim/RaftHeated Chamber
Ultimaker 0.2 PrintaStick 255 80 45 2 no N/A
Raise3D 0.2 PrintaStick 238 80 45 2 no N/A

XSTRAND™ products are designed to be compatible with most open Fused Filament Fabricated 3D Printers.

WARNING: When melted, XSTRAND™ filament can be abrasive due to its glass reinforcement. Printing with XSTRAND™ may reduce lifespan of brass nozzles and extruder driving wheels. It is advised to use hardened steel nozzles or ruby nozzles

Storage and Drying

XSTRAND™ filaments must be stored in a dark and temperate location. It is recommended that the product remain closed in its original packaging until use.

IMPORTANT NOTE: GF30-PA6 is very sensitive to moisture. For optimal printing results, the product must be dried at least 4 hours in the oven at 80°C prior to use, and stored in a dry case, even during printing.

Write your review

No customer reviews for the moment.

You might also like