Fiberon™ PA612-CF15 is a carbon fiber reinforced polyamide filament based on a copolymer of PA6 and PA12. Thanks to its chemical structure, this product has lower moisture sensitivity compared to PA6/66 and PA6-based materials, and better mechanical properties than PA12-based materials. In addition, the carbon fiber reinforcement and Warp-free technology enhance the dimensional stability of the prints produced with this material.

What is the difference between Fiberon™ PA612-CF15 and Fiberon™ PA6-CF20?

Fiberon™ PA612-CF15 exhibits enhanced rigidity and strength in wet conditions compared to Fiberon™ PA6-CF20, owing to its longer chemical chain. While both materials do absorb moisture, PA612-CF demonstrates minimal reduction in mechanical properties, resulting in superior overall performance in wet environments when compared to PA6-CF.

Is it safe while putting cardboard spool to dry the Fiberon™ PA612-CF15 in the oven?

Yes, we have ensured the dimensional stability of the cardboard by subjecting it to a temperature of 100°Ê in the oven. This meticulous drying process guarantees that the cardboard remains free from warping and distortion.

What is the percentage of the carbon fiber content in Fiberon™ PA612-CF15?

It contains 15 wt% carbon fibers.

Do PA612-CF15 prints need annealing? What are the annealing conditions?

We strongly recommend 100°C, 10h annealing to achieve the best performance of the material.