Bambu Support for PLA | 1.75mm | 500g
32.76 €
Tax excluded
Not Rated
Support for PLA
The ultimate support material
- Easy & Tool-free Removal
- Smooth Support Interface
- Recommended for All PLA & PETG
fai acquisti fino a 3.000€ e paga in 3 rate con 
buy up to €3.000 and pay in 3 with
compra hasta 3.000€ y paga en 3 plazos con
prodotto presente su 
Support for PLA
The ultimate support material, compatible with PLA filaments. Effortless, tool-free removal, preserving the pristine surface of your printed object.
Easy, Tool-free Removal
Support PLA is specially formulated to minimize fusion with PLA, thanks to differences in polarity. This unique characteristic ensures hassle-free removal of the support interface, reducing the risk of damage to your printed object.
S02-K0-1.75-500-SPL
| Recommended Printing Settings | |
| Drying Settings (Blast Drying Oven) | 55 °C，8 h |
| Printing and Keeping Container's Humidity | < 20% RH (Sealed, with Desiccant) |
| Nozzle Temperature | 220 - 230 °C |
| Bed Temperature (with Glue) | 35 - 45 °C |
| Printing Speed | < 200 mm/s |
| Physical Properties | |
| Density | 1.22 g/cm³ |
| Vicat Softening Temperature | N / A |
| Heat Deflection Temperature | N / A |
| Melting Temperature | 190 °C |
| Melt Index | 6.4 ± 1.2 g/10 min |
| Mechanical Properties | |
| Tensile Strength | N / A |
| Breaking Elongation Rate | N / A |
| Bending Modulus | N / A |
| Bending Strength | N / A |
| Impact Strength | N / A |
You might also like
Support for PLA
The ultimate support material
- Easy & Tool-free Removal
- Smooth Support Interface
- Recommended for All PLA & PETG
No customer reviews for the moment.