AquaSys® 180 | 500g
200.00 €
Tax excluded
Not Rated
High-temperature, water-soluble support filament. Stable at chamber temperatures up to 180ºC.
fai acquisti fino a 3.000€ e paga in 3 rate con 
buy up to €3.000 and pay in 3 with
compra hasta 3.000€ y paga en 3 plazos con
achetez jusqu'à 3.000€ et payez en 3 fois avec
prodotto presente su 
AquaSys® 180
AquaSys® 180 is the world’s only water-soluble 3D printing support material that’s compatible with Polyetheretherketone (PEEK), Polyetherketoneketone (PEKK), Polyetherimide (PEI), and polyphenylsulfone (PPSU).
It’s stable at chamber temperatures up to 180ºC. It provides complete design freedom.
And it allows the additive manufacturing industry to move on to its next frontier:
printing complex end-use parts, using high-strength thermoplastics.
Unbridled creation.
Make exactly what you want to make, using the exact materials you want to make it with.
Hands-off removal.
With AquaSys 180, you never have to worry about time-sucking post-production tasks.
A true partner for your prints.
AquaSys 180 provides excellent stability, for highly detailed parts with brilliant surfaces.
Material Compatibility
AquaSys 180 is engineered for enhanced adhesion and high thermal stability. Together, these properties allow it to bond effectively to a wide range of hydrophobic and hydrophilic materials. And while it does adhere to most commonly used 3D printing materials, it’s recommended primarily for use with PEEK, PEKK, PEI, and PPSU.
Working with lower temperature materials like ABS or PP? Try AquaSys® 120.
AquaSys 180 is in a class all its own.
No other support method can compete in terms of quality, convenience, or compatibility.
| Breakaway | PVA/BVOH | Chemical-soluble | AquaSys 180 | |
| Compatible with engineering-grade build materials | X | X | X | |
| Requires minimal post-processing | X | X | X | |
| Enables safe, simple disposal | X | X | ||
| Stable at high temperatures | X | X | X | |
| Dissolves in plain tap water | X | X | ||
| Supports complex geometries | X | X | X | |
| Compatible with PEEK, PEKK, PEI, and PPSU | X | X |
811175500G
Specifications
| Extruder Temperature | 230-300ºC (240-260ºC recommended) |
| Build plate temperature | 60-180ºC |
| Chamber temperature | Up to 180ºC |
Printing Parameters
AquaSys 180 filament is designed for use in fused filament fabrication (FFF) printers.
Pathway temperature: Keep the filament below 80°C prior to extrusion. Material that sits idle at temperatures of 80°C or above for extended periods of time prior to extrusion will not extrude properly.
Nozzle temperature: 230 - 300°C
Build plate requirements: AquaSys filaments will adhere to a wide range of build plate materials. If poor adhesion is persistent, increase the temperature of the build plate, but not past the maximum build plate temperature of 180° C.
Adhesives: Glue is not necessary if you use a raft made out of AquaSys 180. Follow your printer model’s material guidelines when printing a raft with another material.
FDM 3D printing material: Pair AquaSys 180 with PEEK, PEKK, PEI, or PPSU.
You might also like
High-temperature, water-soluble support filament. Stable at chamber temperatures up to 180ºC.
No customer reviews for the moment.