Kimya ABS-EC CNT
The Kimya ABS-EC CNT 3D filament belongs to the styrenic polymer family. Acrylonitrile Butadiene Styrene electrical conductor (ABS-EC) is a combination of ABS and electrically active additives: carbon nanotubes.

PETG-S 3D Filament
The 3D filament Kimya PETG-S is produced via copolymerization with PET. Polyethylene terephtalate glycol (PETG) is a saturated polyester polymer.

TPU-R 3D Filament
Thermoplastic “-R” polyurethane (TPU-R) is formulated using recycled materials.

Kimya TPC-91A
The Kimya TPC -91A 3D filament belongs to the thermoplastic copolyester family: is an elastomer. TPC is an elastomer obtained by copolymerization of two types of monomers: an ester (a rigid segment) and an ether (a flexible segment). 

Kimya TPC-ESD
The Kimya TPC-ESD 3D filament belongs to the thermoplastic copolyester family: is an elastomer. TPC is obtained by copolymerization of two types of monomers: an ester (a rigid segment) and an ether (a flexible segment). Its “-ESD” formulation also provides protection against electrostatic discharge.

Kimya TPU-92A 3D Filament
The Kimya TPU-92A 3D filament belongs to the thermoplastic polyurethane (TPU) family.
It offers good resistance to heat and to the external environment as well as a Shore hardness of 92A.

Kimya ABS-ESD Filament
The Kimya ABS-ESD 3D filament belongs to the styrenic polymer family. ABS-ESD is an Acrylonitrile Butadiene Styrene to which an additive has been added to give it Electro Static Discharge properties.

Kimya PEKK-A 3D Filament (KEPSTAN®)
The Kimya PEKK-A 3D filament belongs to the polyaryletherketone family.
Polyetherketoneketone (PEKK) is a thermoplastic polymer.
PEKK-A is the amorphous form of PEKK, providing ease of printing.

Kimya ABS-S Filament
The 3D filament Kimya ABS-S belongs to the styrenic polymer family. Acrylonitrile butadiene styrene (ABS) is a thermoplastic polymer offering high impact resistance and is relatively rigid and lightweight.

Kimya HIPS-R
The Kimya HIPS-R 3D filament belongs to the styrenic polymer family. This High Impact PolyStyrene (HIPS) is a thermoplastic formulated from recycled materials and which –despite being recycled– boasts good resistance to impact and heat. 

ABS-R 3D Filament
Kimya ABS-R 3D filament is a standard ABS based on 100% post-consumer recycled material

PLA-R 3D Filament
The 3D filament Kimya PLA-R is a recycled and biodegradable polymer: this biosourced homopolymer can be obtained from corn starch.

Kimya Tough PLA-HI
The Kimya Tough PLA-HI 3D filament  is a biosourced polymer obtained from corn starch. Polylactic Acid -HI (PLA-HI) is a “High Impact” filament offering increased impact resistance

Kimya PA6-CO Filament
The Kimya PA6-CO filament is a co-polymer based on a Nylon 6 grade. This unfilled polyamide has excellent tensile strength and very low warping behavior.

Kimya PPS-U Filament
The Kimya PPSU-S 3D filament belongs to the polysulfone family. Polyphenylsulfone (PPSU) is an amorphous thermoplastic. It is a technical material with an elevated glass transition temperature and low humidity absorption.

Kimya ASA-S Filament
The 3D filament Kimya ASA-S belongs to the styrenic polymer family. Acrylonitrile styrene acrylate (ASA) is an opaque thermoplastic terpolymer. ASA offers properties close to ABS but is suitable for long-term external use.

Kimya ABS Carbon Filament
The Kimya ABS Carbon 3D filament belongs to the styrenic polymer family. Acrylonitrile-butadiene-styrene-carbon (ABS Carbon) is a mixture of ABS and carbon fibers.

Kimya PEI-1010
The Kimya PEI-1010 3D filament belongs to the family of thermoplastic polyimides. Polyetherimide (PEI) is an amorphous thermoplastic. It benefits from good resistance to temperature and solvents, as well as high dimensional stability.

Kimya PEI-9085
The Kimya PEI-9085 3D filament belongs to the family of thermoplastic polyimides. Polyetherimide (PEI) is an amorphous thermoplastic. If benefits from good resistance to temperature, high resistance to abrasion and high dimensional stability.

Kimya PEI Support for Ultem
The Kimya PEI Support filament is a detachable support material to be used with both Kimya PEI-9085 and Kimya PEI-1010, filaments based on SABIC’s ULTEM. 

Kimya PEKK Carbon
The Kimya PEKK Carbon 3D filament belongs to the polyaryletherketone family. Polyetherketoneketone (PEKK) is a thermoplastic polymer reinforced with carbon fiber. 

Kimya PEKK-SC 3D Filament (KEPSTAN®)
The Kimya PEKK-SC 3D filament belongs to the polyaryletherketone family. Polyetherketoneketone (PEKK) is a semi-crystalline thermoplastic polymer.
PEKK-SC is PEKK in semi-crystalline form, imparting it with increased heat resistance.

Kimya PETG Carbon 3D Filament
The Kimya PETG Carbon 3D filament is a mixture of PETG and carbon fibers. The addition of carbon fibers to PETG provides high levels of mechanical performance.

Kimya ABS Kevlar Filament
The Kimya ABS Kevlar 3D filament belongs to the styrenic polymer family. Acrylonitrile Butadiene Styrene Kevlar (ABS Kevlar) is a composite filament enriched in aramid fibers.